Skip to content
iQBus HomeDocumentationBlogContact
Updated September 28, 2026
Adapters/HL7 MLLP adapter
Adapter

HL7 MLLP adapter

Real-time HL7 v2 exchange with EHR, HIS, LIS and RIS systems. Accepts MLLP connections on the Listener side and sends to remote MLLP endpoints on the Caller side, with acknowledgements in both directions.

DIRECTION ↓ ↑ Receive & Send MODES One-way · Two-way AUTHENTICATION HL7 MLLP Authentication EDITION All editions

MLLP is the TCP transport most clinical systems use for live HL7 v2 feeds: ADT, orders, results, scheduling. It wraps each message in start and end block characters so the receiver knows where one message ends and the next begins. The iQBus HL7 MLLP adapter covers both directions in one adapter, paired with an HL7 MLLP Authentication that carries the connection target and optional TLS settings.

Bound to a receive port, the adapter listens on a TCP port for inbound MLLP connections. Each message is unwrapped, published to the bus, and acknowledged with an HL7 ACK so the sending system can move to its next message. A message the bus cannot accept gets a NAK, and the sender keeps it queued.

Bound to a send port, the adapter connects to the remote host and port, wraps and sends the message, and waits for the ACK. Two-way mode returns the ACK to the bus so the integration thread can act on an accept or a reject.

The HL7 MLLP adapter pairs with a dedicated HL7 MLLP Authentication object carrying host, port and optional TLS certificate settings.

Configuration field set and worked example available on request.

That is the HL7 MLLP adapter

Real-time HL7 v2 over TCP in both directions, paired with an HL7 MLLP Authentication object. For file-based HL7 batches, see the HL7 ADT feed tutorial. Back to Adapters.